Electro-Mechanical Timer Setting Instructions

MODEL SS-50, 100 & 150 M

AUTOMATIC TIMER SETTING INSTRUCTIONS

Your Pro-Tech-Tor Electro-Mechanical 24-Hour Timer is combined with an easy to set solid state Interval Timer, both housed in a weatherproof plastic Nema 3 enclosure, designed for long term dependability.

I. How To Set 24-Hour Timer:

Align the correct current time of day with the Time Arrow, located in center of timer on small black plate. Do this by rotating the 24-Hour Time Wheel counter-clockwise only. Watch out for A.M. morning settings versus P.M. night settings featured on the face of Timer Wheel.

For each "ON" Time required, swing out a lever on Timer Wheel at appropriate time selected, e.g. 8:00 A.M. As the Timer Wheel rotates automatically, the swung out lever will trip the Micro-Switch located at bottom of timer wheel.

II. How To Set The Duration Of Spray Cycle:

Located at the bottom inside of Timer Box is the solid state Interval Timer. Just rotate the knob on top to the correct number of seconds, e.g. 45 sec.

EXAMPLE OF AVERAGE SUMMERTIME SCHEDULE*

8:00 AM	10:30 AM	1:00 PM	3:30 PM	6:00 PM	8:30PM	10:00PM	1:00 AM	4:00 AM
45 SEC	45 SEC	45 SEC	45 SEC	45 SEC	45 SEC	45 SEC	45 SEC	45 SEC
FLY CONTROL						MOSQUITO CONTROL

* The above chart is designed as a guide only. More or less settings will not be unusual, depending on climate and local environmental factors.

Click here to return to HOME PAGE

Pro-Tech Livestock Corp.
PO Box 1450
Tomball, TX 77377
(281) 351-8134 (800) 776-5005
CustomerService@protech-control.com

Web design by